Hefei Shuoyuan Engineering Machinery Parts Co., Ltd.

Industry News

How to maintain the long-term storage of construction machinery?

Word:[Big][Middle][Small] QR Code 2018/5/29     Viewed:    

How to properly store engineering machinery is an important knowledge that engineering machine operators should master. In particular, many construction machinery may not be used for a long time, or after a certain project is completed, it is necessary to store these mechanical equipment for a long time. At this time, how the engineering machinery and equipment need to be stored for a long period of time becomes an important issue. How to store the construction machinery during the storage period? How to maintain these equipments? Manufacturers of construction vehicles - Fushun Hongqiao Construction Machinery Manufacturing Co., Ltd. !

How to properly store construction machinery:

1, should be parked in a dry room. The manufacturer of engineering vehicle coverings - Fushun Hongqiao Construction Machinery Manufacturing Co., Ltd. has suggested that it must be parked outdoors, and should choose a flat surface and put on a wooden board. Cover with a cover cloth after parking.

2. Before the long-term storage, it is necessary to maintain the machine, repair the damaged parts, and thoroughly clean it to keep the technology in good condition.

3. Arrangement and arrangement of the parking airport shall ensure that the access of any machine is not affected by other machinery.

4. The mechanical fuel lever should be placed in the idle position, and the joysticks should be placed in the neutral position.

Engine storage:

1. Let go of the cooling water in the engine.

2, replace the engine oil. The new oil is usually neutral and will not corrode the metal parts of the engine.

3. Fill the fuel tank with diesel to avoid rusting the fuel tank. Preservatives should also be added if conditions allow.

4. During the shutdown period, the engine should be started once a month to make the machine run at a short distance, so that a new oil film can be established at each part lubrication to prevent rust. Manufacturer of engineering vehicle cover parts - Fushun City Hongqiao Construction Machinery Manufacturing Co., Ltd. Note: It should be filled with cooling water before start-up, and cooling water should be exhausted at the end.

Storage of storage batteries:

1. Remove the battery and place the battery in a dry and frost-proof place. To keep the surface clean and dry, it is forbidden to place conductive objects on the battery. When removing the battery, first cut off the negative wire, and then cut off the positive wire; when installing, first connect the positive wire and then connect the negative wire. Because the electrical system of construction machinery is a negative ground, this is to prevent the short circuit caused when the battery is removed.

2. The manufacturer of engineering vehicle coverings - Fushun Hongqiao Construction Machinery Manufacturing Company indicated that lead-acid batteries should be charged once a month.

Anti-rust treatment:

1. The manufacturer of the cover of the engineering vehicle-Fushun Hongqiao Construction Machinery Manufacturing Co., Ltd. reminds that before storage, the size of the peeling area of the anti-rust paint on the outer surface should be determined according to the size of the peeling area of the anti-corrosion paint on the outer surface. repair.

2. The working devices of construction machinery, such as the screed of the pavers, the bucket of the loader, the scraper of the grader, etc., shall be greased with the anti-rust method of the bare metal.

Go Back
Print
138-5695-6700
0551-62532907
浏览手机站